Type: | SECURITY |
Severity: | MODERATE |
Release Date: | 2011-12-14 |
[2.6.32-300.3.1.el6uek]
- proc: fix oops on invalid /proc/
- Revert 'capabilities: do not grant full privs for setuid w/ file caps + no
effective caps' (Joe Jin)
- [mm]: Use MMF_COMPAT instead ia32_compat to prevent kabi be broken (Joe Jin)
- proc: enable writing to /proc/pid/mem (Stephen Wilson)
- proc: make check_mem_permission() return an mm_struct on success (Stephen Wilson)
- proc: hold cred_guard_mutex in check_mem_permission() (Joe Jin)
- proc: disable mem_write after exec (Stephen Wilson)
- mm: implement access_remote_vm (Stephen Wilson)
- mm: factor out main logic of access_process_vm (Stephen Wilson)
- mm: use mm_struct to resolve gate vma's in __get_user_pages (Stephen Wilson)
- mm: arch: rename in_gate_area_no_task to in_gate_area_no_mm (Stephen Wilson)
- mm: arch: make in_gate_area take an mm_struct instead of a task_struct
(Stephen Wilson)
- mm: arch: make get_gate_vma take an mm_struct instead of a task_struct
(Stephen Wilson)
- x86: mark associated mm when running a task in 32 bit compatibility mode
(Stephen Wilson)
- x86: add context tag to mark mm when running a task in 32-bit compatibility
mode (Stephen Wilson)
- auxv: require the target to be tracable (or yourself) (Al Viro)
- close race in /proc/*/environ (Al Viro)
- report errors in /proc/*/*map* sanely (Al Viro)
- pagemap: close races with suid execve (Al Viro)
- make sessionid permissions in /proc/*/task/* match those in /proc/* (Al Viro)
- Revert 'report errors in /proc/*/*map* sanely' (Joe Jin)
- Revert 'proc: fix oops on invalid /proc/
[2.6.32-300.2.1.el6uek]
- [kabi] Add missing kabi (Srinivas Maturi)
- report errors in /proc/*/*map* sanely (Joe Jin)
[2.6.32-300.1.1.el6uek]
- [SCSI] qla4xxx: fix build error for OL6 (Joe Jin)
- Ecryptfs: Add mount option to check uid of device being mounted = expect uid (Maxim Uvarov)
- proc: fix oops on invalid /proc/
- x86/mm: Fix pgd_lock deadlock (Joe Jin)
- x86, mm: Hold mm->page_table_lock while doing vmalloc_sync (Joe Jin)
- proc: restrict access to /proc/PID/io (Vasiliy Kulikov)
- futex: Fix regression with read only mappings (Shawn Bohrer)
- x86-32, vdso: On system call restart after SYSENTER, use int db_5.ELSA-2011-2037x80 (H. Peter Anvin)
- x86, UV: Remove UV delay in starting slave cpus (Jack Steiner)
- Include several Xen pv hugepage fixes. (Dave McCracken)
- GRO: fix merging a paged skb after non-paged skbs (Michal Schmidt)
- md/linear: avoid corrupting structure while waiting for rcu_free to complete. (NeilBrown)
- xen: x86_32: do not enable iterrupts when returning from exception in interrupt context (Igor Mammedov)
- xen/smp: Warn user why they keel over - nosmp or noapic and what to use instead. (Konrad Rzeszutek Wilk)
- hvc_console: Improve tty/console put_chars handling (Hendrik Brueckner)
- 3w-9xxx: fix iommu_iova leak (James Bottomley)
- aacraid: reset should disable MSI interrupt (Vasily Averin)
- libsas: fix failure to revalidate domain for anything but the first expander child. (Mark Salyzyn)
- splice: direct_splice_actor() should not use pos in sd (Changli Gao)
- libsas: fix panic when single phy is disabled on a wide port (Mark Salyzyn)
- epoll: fix spurious lockdep warnings (Nelson Elhage)
- kobj_uevent: Ignore if some listeners cannot handle message (Milan Broz)
- kmod: prevent kmod_loop_msg overflow in __request_module() (Jiri Kosina)
- nfsd4: ignore WANT bits in open downgrade (J. Bruce Fields)
- nfsd4: Remove check for a 32-bit cookie in nfsd4_readdir() (Bernd Schubert)
- iommu/amd: Fix wrong shift direction (Joerg Roedel)
- cfq: Don't allow queue merges for queues that have no process references (Jeff Moyer)
- cfq-iosched: get rid of the coop_preempt flag (Jens Axboe)
- cfq: break apart merged cfqqs if they stop cooperating (Jeff Moyer)
- cfq: change the meaning of the cfqq_coop flag (Jeff Moyer)
- cfq: merge cooperating cfq_queues (Jeff Moyer)
- cfq: calculate the seek_mean per cfq_queue not per cfq_io_context (Jeff Moyer)
- kcore: fix test for end of list (Dan Carpenter)
- deal with races in /proc/*/{syscall,stack,personality} (Al Viro)
- NLM: Don't hang forever on NLM unlock requests (Maxim Uvarov)
- vm: fix vm_pgoff wrap in upward expansion (Hugh Dickins)
- vm: fix vm_pgoff wrap in stack expansion (Linus Torvalds)
- net_sched: Fix qdisc_notify() (Eric Dumazet)
- drivers/net/rionet.c: fix ethernet address macros for LE platforms (Alexandre Bounine)
- ext2,ext3,ext4: don't inherit APPEND_FL or IMMUTABLE_FL for new inodes (Theodore Ts'o)
- st: fix race in st_scsi_execute_end (Petr Uzel)
- Make scsi_free_queue() kill pending SCSI commands (Bart Van Assche)
- NFS/sunrpc: don't use a credential with extra groups. (NeilBrown)
- netlink: validate NLA_MSECS length (Johannes Berg)
- mtd: mtdchar: add missing initializer on raw write (Peter Wippich)
- PM / Suspend: Off by one in pm_suspend() (Dan Carpenter)
- hfs: add sanity check for file name length (Dan Carpenter)
- md/raid5: abort any pending parity operations when array fails. (NeilBrown)
- mm: avoid null pointer access in vm_struct via /proc/vmallocinfo (Mitsuo Hayasaka)
- USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c (Andrew Worsley)
- usb-storage: Accept 8020i-protocol commands longer than 12 bytes (Alan Stern)
- [SCSI] ql4xxx: upgrade to 5.02.14.00.32.01-c0 (Joe Jin)
- [netdrv] be2net: Merge fixes for CVE-2011-3347 (Joe Jin)
- ext4: fix BUG_ON() in ext4_ext_insert_extent() (Zheng Liu)
- proc: fix a race in do_io_accounting() (Vasiliy Kulikov)
- capabilities: do not grant full privs for setuid w/ file caps + no effective caps (Zhi Li)
- KEYS: Fix a NULL pointer deref in the user-defined key type (Maxim Uvarov)
- igb: Fix for Alt MAC Address feature on 82580 and later devices (Joe Jin)
- [netdrv] enic: fix accidental GRO off by default (Joe Jin)
- Fixing use of netif_set_real_num_tx_queues in cxgb4_main.c (Joe Jin)
- firmware: Update cxgb4 NIC driver firmware (Joe Jin)
- firmware Add latest cxgb3 firmware (Joe Jin)
- [netdrv] cxgb3: misc fixes. (Joe Jin)
- bnx2x: upgrade bnx2x (Joe Jin)
- dcb: add DCBX mode to event notifier attributes (John Fastabend)
- dcb: Use ifindex instead of ifname (Mark Rustad)
- dcbnl: unlock on an error path in dcbnl_cee_fill() (Dan Carpenter)
- dcbnl: Add CEE notification (Shmulik Ravid)
- dcbnl: Aggregated CEE GET operation (Shmulik Ravid)
- dcb: use nlmsg_free() instead of kfree() (Dan Carpenter)
- dcb: Add missing error check in dcb_ieee_set() (John Fastabend)
- dcb: fix return type on dcb_setapp() (John Fastabend)
- dcb: Add dcb_ieee_getapp_mask() for drivers to query APP settings (John Fastabend)
- dcb: Add ieee_dcb_delapp() and dcb op to delete app entry (John Fastabend)
- dcb: Add ieee_dcb_setapp() to be used for IEEE 802.1Qaz APP data (John Fastabend)
- net: dcbnl, add multicast group for DCB (John Fastabend)
- dcb: Add DCBX capabilities bitmask to the get_ieee response (John Fastabend)
- dcbnl: add support for retrieving peer configuration - cee (Shmulik Ravid)
- dcbnl: add support for retrieving peer configuration - ieee (Shmulik Ravid)
- net: dcbnl: check correct ops in dcbnl_ieee_set() (John Fastabend)
- Don't potentially dereference NULL in net/dcb/dcbnl.c:dcbnl_getapp() (Jesper Juhl)
- net: dcb: application priority is per net_device (John Fastabend)
- dcbnl: make get_app handling symmetric for IEEE and CEE DCBx (John Fastabend)
- dcb: use after free in dcb_flushapp() (Dan Carpenter)
- dcb: unlock on error in dcbnl_ieee_get() (Dan Carpenter)
- dcbnl: more informed return values for new dcbnl routines (Shmulik Ravid)
- dcbnl: cleanup (Shmulik Ravid)
- net_dcb: add application notifiers (John Fastabend)
- [netdrv] firmware: add bnx2x FW 7.0.23 (Joe Jin)
- [netdrv] Fixing use of netif_set_real_num_tx_queues in bnx2.c (Joe Jin)
- [netdrv] tg3: drver update. (Joe Jin)
- tg3: negate USE_PHYLIB flag check (Jiri Pirko)
- [netdrv] e1000e: fix WoL on 82578DM and 82567V3 (Joe Jin)
- e1000: don't enable dma receives until after dma address has been setup (Dean Nelson)
- [SCSI] bnx2i: Fixed the endian on TTT for NOP out transmission (Eddie Wai)
- [SCSI] bnx2fc: upgrade to 1.0.8 (Joe Jin)
- [scsi] hpsa: add heartbeat sysfs host attribute (Joe Jin)
- [SCSI] move PCI_DEVICE_ID_HP_CISSE to include/linux/pci_ids.h (Joe Jin)
- [SCSI] lpfc: update to 8.3.5.45.4p (Joe Jin)
- [SCSI] be2iscsi: upgrade to 4.1.239.0 (Joe Jin)
- fcoe/libfcoe: Move common code for fcoe_get_lesb to fcoe_transport (Joe Jin)
- libfc: Prevent race that causes panic during FCoE port destroy via sysfs (Joe Jin)
- [SCSI] isci: dynamic interrupt coalescing (Dan Williams)
- megaraid_sas: trim the space and tab. (Joe Jin)
- megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic (Joe Jin)
- scsi_transport_fc: Fix deadlock during fc_remove_host (Joe Jin)
- [SCSI] libfc: improve flogi retries to avoid lport stuck (Vasu Dev)
- [SCSI] libfc: avoid exchanges collision during lport reset (Vasu Dev)
- [SCSI] libfc: fix checking FC_TYPE_BLS (Vasu Dev)
- [SCSI] libsas: fix warnings when checking sata/stp protocol (Dan Williams)
- [SCSI] libsas: disable scanning lun > 0 on ata devices (Dan Williams)
- [SCSI] libsas: Allow expander T-T attachments (Luben Tuikov)
- [SCSI] isci: atapi support (Dan Williams)
- isci: export phy events via ->lldd_control_phy() (Dan Williams)
- [SCSI] isci: The port state should be set to stopping on the last phy. (Jeff Skirvin)
- [SCSI] isci: fix decode of DONE_CRC_ERR TC completion status (Jeff Skirvin)
- [SCSI] isci: SATA/STP I/O is only returned in the normal path to libsas (Jeff Skirvin)
- [SCSI] isci: fix support for large smp requests (Dan Williams)
- [SCSI] isci: fix missed unlock in apc_agent_timeout() (Jeff Skirvin)
- [SCSI] isci: fix event-get pointer increment (Dan Williams)
- [SCSI] isci: add version number (Dan Williams)
- [SCSI] isci: fix sata response handling (Dan Williams)
- [SCSI] isci: Leave requests alone if already terminating. (Jeff Skirvin)
- [SCSI] isci: initial sgpio write support (Dan Williams)
- [SCSI] isci: fix sgpio register definitions (Dan Williams)
- [SCSI] libsas: sgpio write support (Dan Williams)
- [SCSI] scsi scan: don't fail scans when host is in recovery (Mike Christie)
- net: Remove atmclip.h to prevent break kabi check (Joe Jin)
- SPEC: ol6 req dracut-kernel-004-242.0.3 (Maxim Uvarov)
- SPEC: req udev-095-14.27.0.1.el5_7.1 or more (Maxim Uvarov)
- SPEC: el5 mkinird more then 5.1.19.6-71.0.10 (Maxim Uvarov)
- ipv6: make fragment identifications less predictable (Joe Jin)
- vlan: fix panic when handling priority tagged frames (Joe Jin)
- ipv6: udp: fix the wrong headroom check (Shan Wei)
- b43: allocate receive buffers big enough for max frame len + offset (Maxim Uvarov)
- fuse: check size of FUSE_NOTIFY_INVAL_ENTRY message (Miklos Szeredi)
- cifs: fix possible memory corruption in CIFSFindNext (Jeff Layton)
- crypto: md5 - Add export support (Maxim Uvarov)
- fs/partitions/efi.c: corrupted GUID partition tables can cause kernel oops (Timo Warns)
- block: use struct parsed_partitions *state universally in partition check code (Maxim Uvarov)
- net: Compute protocol sequence numbers and fragment IDs using MD5 (Maxim Uvarov)
- perf tools: do not look at ./config for configuration (Jonathan Nieder)
- Make TASKSTATS require root access (Linus Torvalds)
- TPM: Zero buffer after copying to userspace (Peter Huewe)
- TPM: Call tpm_transmit with correct size (Peter Huewe)
- PCI: Set device power state to PCI_D0 for device without native PM support (Ajaykumar Hotchandani)
[2.6.32-300.0.12.el6uek]
- Install include/drm headers (Maxim Uvarov) [orabug 13260234]
- qla2xxx: Double check for command completion if abort mailbox command fails (Chad Dupuis)
- Ensure full IOC buffer can be mapped (Martin K. Petersen)
- Fix incorrect timeout handling (Martin K. Petersen)
[2.6.32-300.0.11.el6uek]
- fix pgoff in mbind vma merge (Caspar Zhang) [orabug 13370691]
[2.6.32-300.0.10.el6uek]
- compat_ioct: move initialization before use in sg_ioctl_trans() (Dan Carpenter)
- genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier (Dan Carpenter)
- xen/timer: Missing IRQF_NO_SUSPEND in timer code broke suspend [orabug 13359907]
- pids: fix a race in pid generation that causes pids to be reused immediately (Salman) [orabug 13370594]
- Revert 'mlx4: Updated the driver version from 1.5.1.6 August 2010 to 1.5.4.1 March 2011 update' (Maxim Uvarov) [orabug 13322248]
[2.6.32-300.0.9.el6uek]
- [firmware] bnx2x 7.0.20 (Maxim Uvarov) [orabug 13354737]
- Revert 'qla2xxx: Double check for command completion if abort mailbox [orabug 13339986]
- SPEC: fixes for spec file [orabugs 13359985, 13339700, 13348381]
- kabi: Modify Kabi and enable kabicheck
[2.6.32-300.0.8.el6uek]
- ipv6: add a missing unregister_pernet_subsys call (Neil Horman)
- SPEC: hwcap set to 1 for nosegneg (Guru Anbalagane) [orabug 13321811]
- put firmware to kernel version specific location (Maxim Uvarov) [orabug 13254457]
- xen: drop xen_sched_clock in favour of using plain wallclock time (Jeremy Fitzhardinge)
- Revert '[scsi] add lockless to improve queuecommand performance'
- fix fnic init panic and san disks are not visible (Xiaowei Hu)
- SPEC: Add debug to the list of kernels that kernel-uek should replace in
/etc/sysconfig/kernel (Kevin Lyons) [bug 13260459,13339700]
- bfa: cleanup Makefile. (Joe Jin)
- fc class: add fc host default default dev loss setting (Mike Christie)
- fc class: add fc host dev loss sysfs file (Mike Christie)
- add dev_loss_tmo support for lpfc, fnic and ibmvfc (Joe Jin)
- scsi_transport_fc: Protect against overflow in dev_loss_tmo (Hannes Reinecke)
- [netdrv] bna: cleanup Makefile. (Joe Jin)
- PCI/e1000e: Add and use pci_disable_link_state_locked() (Yinghai Lu)
- tracepoint: Move signal sending tracepoint to events/signal.h (Masami Hiramatsu)
- perf_event, x86, mce: Use TRACE_EVENT() for MCE logging (Hidetoshi Seto)
- xen: Add support for hugepages on Xen pv domains, including support for hugepages
in the balloon driver. (Dave Mccracken)
[2.6.32-300.0.7.el6uek]
- Add entropy generation to NIC drivers
- [netdrv] bnx2x: replace pci_find_capability to pci_pcie_cap
- [pci] dma-mapping: dma-mapping.h: add dma_set_coherent_mask
- PCI: introduce pci_is_pcie()
- PCI: introduce pci_pcie_cap()
- PCI: cache PCIe capability offset
- [scsi] add lockless to improve queuecommand performance
[2.6.32-300.0.6.el6uek]
- [netdrv] ixgbe: correct Makefile.
[2.6.32-300.0.5.el6uek]
bnx2: upgrade to 2.1.11
vlan: allow null VLAN ID to be used
ethtool: Add 20G bit definitions
ethtool: Add Direct Attach support to connector port reporting
bnx2i: add pci_id for brocadcom
fcoe: Prevent creation of an NPIV port with duplicate WWPN
bnx2i: upgrade to 2.7.0.3
bnx2fc: upgrade to 1.0.6
lpfc: upgrade to 0:8.3.5.45.3p
mptsas: upgrade to 3.04.19
netdev: ethtool RXHASH flag
be2net: upgrade to 4.0.160r
be2iscsi: upgrade to 4.0.160r
vmxnet3: upgrade to 1.1.18.0-k
add vmxnet3 support
e100: merge misc fixes.
igb: upgrade to 3.0.6-k
igbvf: upgrade to 2.0.0-k
e1000: upgrade to 7.3.21-k6-1-NAPI
e1000e: upgrade to 1.4.4-k
ixgbevf: upgrade to 2.1.0-k
[netdrv] bnx2x: upgrade to 1.70.00-0]
[block] cciss: upgrade to 3.6.28]
[scsi] hpsa: upgrade to 2.0.2-3]
[scsi] arcmsr: upgrade to 1.20.00.15.el6u2 2010/08/05]
[scsi] megaraid: minor update megaraid]
fcoe: correct checking for bonding
[scsi] ipr: upgrade to 2.5.2]
[SCSI] sd: Combine DIF/DIX error handling]
[SCSI] Fix printing of failed 32-byte commands]
[SCSI] sd: Logical Block Provisioning update]
[SCSI] sd: retry read_capacity on UNIT_ATTENTION]
[SCSI] libfc: fix mm leak in handling incoming request for target discovery]
[SCSI] libfc: release DDP context if frame_send() fails]
[SCSI] libfc: don't call resp handler after FC_EX_TIMEOUT]
[SCSI] libfc: fix race in SRR response]
[SCSI] libfc: do not immediately retry the cmd when seq_send fails in fc_fcp_send_data]
[SCSI] libfcoe: Remove unnecessary module state checks]
[SCSI] libfc: Enhancement to RPORT state machine applicable only for VN2VN mode]
[SCSI] fcoe: Unable to select the exchangeID from offload pool for storage targets]
[SCSI] fcoe: Round-robin based selection of CPU for post-processing of incoming commands]
[SCSI] fcoe: Amends previous patch, Round-robin based selection of CPU for post processing of incoming request for FCoE target]
[SCSI] libfc:Fix for exchange/seq loopup failure when FCoE stack is used as target and connected to windows initaitor]
[SCSI] libfc: post reset event on lport reset]
[SCSI] fcoe: cleanup cpu selection for incoming requests]
[SCSI] scsi_dh_alua: Attach to UNAVAILABLE/OFFLINE AAS devices]
[SCSI] iscsi: add module alias]
[SCSI] iscsi: fix iscsi_endpoint leak]
[SCSI] libiscsi: add helper to convert addr to string]
[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function]
[SCSI] iscsi class: add callout to get iscsi_endpoint values]
[SCSI] libiscsi_tcp: use kmap in xmit path]
[SCSI] iscsi_tcp: fix locking around iscsi sk user data]
[SCSI] libiscsi_tcp: fix LLD data allocation]
[SCSI] libsas: remove spurious sata control register read/write]
[SCSI] libsas: fix SATA NCQ error]
[SCSI] libsas: fix loopback topology bug during discovery]
[SCSI] fcoe: remove unused ptype field in fcoe_rcv_info]
[SCSI] libfc: use FC_MAX_ERROR_CNT]
[SCSI] libfc: Remove the reference to FCP packet from scsi_cmnd in case of error]
[SCSI] libfc: release exchg cache]
[SCSI] libfc, fcoe: ignore rx frame with wrong xid info]
[SCSI] libfc: two minor changes in comments]
[SCSI] libfc: cleanup sending SRR request]
[SCSI] libfc: fix warn on in lport retry]
[SCSI] fcoe: add fip retry to avoid missing critical keep alive]
libfc: fix fc_eh_host_reset
[SCSI] libfc: block SCSI eh thread for blocked rports]
[SCSI] libfc: fix referencing to fc_fcp_pkt from the frame pointer via fr_fsp()]
[SCSI] scsi_lib: pause between error retries]
KConfig: add CONFIG_UEK5=n to ol6/config-generic
[SCSI] Fix race when removing SCSI devices]
ipmi: reduce polling when interrupts are available
ipmi: reduce polling
ipmi: Fix IPMI errors due to timing problems
[SCSI] scsi_dh: Make alua hardware handler's activate() async]
[SCSI] scsi_dh_alua: Handle all states correctly]
[SCSI] scsi_dh_alua: fix submit_stpg return]
[SCSI] scsi_dh_alua: fix deadlock in stpg_endio]
[SCSI] scsi_dh_alua: fix stpg_endio group state reporting]
[SCSI] scsi_dh: cosmetic change to sizeof()]
[SCSI] scsi_dh_rdac : Add definitions for different RDAC operating modes]
[SCSI] scsi_dh_rdac : decide whether to send mode select based on operating mode]
[SCSI] dh_rdac: Use WWID from C8 page instead of Subsystem id from C4 page to identify storage]
[SCSI] dh_rdac: Associate HBA and storage in rdac_controller to support partitions in storage]
[SCSI] scsi_dh: Make hp hardware handler's activate() async]
[SCSI] scsi_dh_hp_sw: fix deadlock in start_stop_endio]
cnic: upgrade to 2.5.7
update enic to 2.1.1.24
enic: remove VF
[SCSI] libiscsi: use bh locking instead of irq with session lock]
[SCSI] libiscsi: Check TMF state before sending PDU]
iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]
[SCSI] fix id computation in scsi_eh_target_reset()]
[SCSI] Reduce error recovery time by reducing use of TURs]
[scsi] mpt2sas: upgrade 09.101.00.00]
[SCSI] fcoe: Rearrange fcoe port and NPIV port cleanup]
[SCSI] fcoe: Fix deadlock between fip's recv_work and rtnl]
[SCSI] Add missing SPC-4 CDB and MAINTENANCE_[IN,OUT] service action definitions]
[SCSI] scsi_debug: Thin provisioning support]
[SCSI] scsi_debug: fix Thin provisioning support]
[SCSI] scsi_debug: add max_queue + no_uld parameters]
[SCSI] scsi_debug: Block Limits VPD page fixes]
[SCSI] scsi_debug: fix map_region and unmap_region oops]
[SCSI] scsi_debug: Update thin provisioning support]
[SCSI] scsi_debug: Convert to use root_device_register() and root_device_unregister()]
[SCSI] scsi_debug: set resid to indicate no data-in when medium error]
[SCSI] scsi_debug: Fix 32-bit overflow in do_device_access causing memory corruption]
[SCSI] scsi_debug: Logical Block Provisioning (SBC3r26)]
[SCSI] scsi_debug: add consecutive medium errors]
drivers/firmware/iscsi_ibft.c: use %pM to show MAC address
drivers/firmware/iscsi_ibft.c: remove NIPQUAD_FMT, use %pI4
x86: Make sure wakeup trampoline code is below 1MB
ibft, x86: Change reserve_ibft_region() to find_ibft_region()
ibft: Update iBFT handling for v1.03 of the spec.
[xen] remove unused functions.]
bitmap: introduce bitmap_set, bitmap_clear, bitmap_find_next_zero_area
[netdrv] s2io: upgrade to 2.0.26.28]
[watchdog] hpwdt: upgrade to 1.3.0]
qla2xxx: During loopdown perform Diagnostic loopback.
qla2xxx: Save and restore irq in the response queue interrupt handler.
qla2xxx: Prevent CPU lockups when 'ql2xdontresethba' module param is set.
qla2xxx: Fix array out of bound warning.
qla2xxx: Acquire hardware lock while manipulating dsd list.
qla2xxx: check for marker IOCB during response queue processing.
qla2xxx: Fix qla24xx revision check while enabling interrupts.
qla2xxx: Implemeted beacon on/off for ISP82XX.
qla2xxx: Double check for command completion if abort mailbox command fails.
qla2xxx: T10 DIF - Convert HBA specific checks to capability based.
qla2xxx: Add support for ISP82xx to capture dump (minidump) on failure.
qla2xxx: Enable write permission to some debug related module parameters to be changed dynamically.
qla2xxx: Provide method for updating I2C attached VPD.
qla2xxx: Set the task attributes after memsetting fcp cmnd.
qla2xxx: Update to the beacon implementation.
qla2xxx: Correct inadvertent loop state transitions during port-update handling.
qla2xxx: Return sysfs error codes appropriate to conditions.
qla2xxx: Issue mailbox command only when firmware hung bit is reset for ISP82xx.
qla2xxx: Don't call alloc_fw_dump for ISP82XX.
qla2xxx: Remove qla2x00_wait_for_loop_ready function.
qla2xxx: Display FCP_CMND priority on update.
qla2xxx: Check for SCSI status on underruns.
qla2xxx: Fix for active_mask warning.
qla2xxx: Updated the driver version to 8.03.07.08.32.1-k.
ixgbe-3.4.24
kernel.h: add BUILD_BUG_ON_NOT_POWER_OF_2()
isci update
isci firmware update
tg3: Updated the driver version from 3.113 to 3.119
mlx4: Updated the driver version from 1.5.1.6 August 2010 to 1.5.4.1
[2.6.32-300.0.4.el6uek]
- Add 32-bit value for MAX_LOCAL_APIC to fix i386-i686 build error after a9da091
[2.6.32-300.0.3.el6uek]
- [NET] Update qlcnic driver to 5.0.24 [orabug 13005421]
- [NET] Update netxen NIC driver to 4.0.76 [orabug 13005427]
- [SCSI] Update megaraid_sas driver to v5.40-rc1 [orabug 13005432]
- [NET] Update Brocade BNA driver to 3.0.2.2 [orabug 13005438]
- [SCSI] Update Brocade BFA driver to 3.0.2.2 [orabug 13005441]
- [NET] Update qlge driver to v1.00.00.29.00.00-01 [orabug 13005443]
- [SCSI] mpt2sas: Add a module parameter that permits overriding protection capabilities (Martin K. Petersen)
- [SCSI] mpt2sas: Return the correct sense key for DIF errors (Martin K. Petersen)
- [SCSI] mpt2sas: Do not check DIF for unwritten blocks (Martin K. Petersen)
- [NET] bnx2x: prevent flooded warning kernel info [orabug 12687487] (Joe Jin)
- [SCSI] fix lport uninitalized bug in fnic [orabug 12866385] (Xiaowei Hu)
- acpi: Handle xapic/x2apic entries in MADT at same time (Yinghai Lu yinghai@kernel.org)
[2.6.32-300.0.2.el6uek]
- Revert 'netns xfrm: fixup xfrm6_tunnel error propagation'
- block: export blk_{get,put}_queue()
- Revert 'block: export blk_{get,put}_queue()'
[2.6.32-300.0.1.el6uek]
- [SCSI] mpt2sas: Fix missing reference tag seed with Type 2 devices (Martin K. Petersen)
- stable tree merge to 2.6.32.45
CVE-2011-1020 |
CVE-2011-1577 |
CVE-2011-1585 |
CVE-2011-2495 |
CVE-2011-2525 |
CVE-2011-3638 |
CVE-2011-4110 |
CVE-2011-4330 |
CVE-2011-2707 |
Release/Architecture | Filename | MD5sum | Superseded By Advisory |
Oracle Linux 5 (i386) | kernel-uek-2.6.32-300.3.1.el5uek.src.rpm | 5b21593bdb11cedd291237cc75519aa8 | ELSA-2020-5936 |
ofa-2.6.32-300.3.1.el5uek-1.5.1-4.0.53.src.rpm | e75138da9a6fb1144906896e73b6c4ce | - | |
kernel-uek-2.6.32-300.3.1.el5uek.i686.rpm | cd1b2dd165608ed39d64e35c84102ce4 | ELSA-2020-5936 | |
kernel-uek-debug-2.6.32-300.3.1.el5uek.i686.rpm | 5445d4ece935c6f79a5f22573cfe7bdc | ELSA-2020-5936 | |
kernel-uek-debug-devel-2.6.32-300.3.1.el5uek.i686.rpm | d5f2d59372e3565605ec0c2ffcd1758a | ELSA-2020-5936 | |
kernel-uek-devel-2.6.32-300.3.1.el5uek.i686.rpm | 1c2e089085c6d6cbc629084a50acc917 | ELSA-2020-5936 | |
kernel-uek-doc-2.6.32-300.3.1.el5uek.noarch.rpm | 2ac6244634679d284dd6235da511dea2 | ELSA-2020-5936 | |
kernel-uek-firmware-2.6.32-300.3.1.el5uek.noarch.rpm | 60a133b718f92aed90b8256be41c97a3 | ELSA-2020-5936 | |
kernel-uek-headers-2.6.32-300.3.1.el5uek.i686.rpm | 5d4f1832537e0f3e4a41ebddcfdd6650 | ELSA-2014-3108 | |
ofa-2.6.32-300.3.1.el5uek-1.5.1-4.0.53.i686.rpm | f65c587605004c2e0ea21e12a19ad509 | - | |
ofa-2.6.32-300.3.1.el5uekdebug-1.5.1-4.0.53.i686.rpm | cc8ddd4e3d1fdfbf6cd0279e91f00404 | - | |
Oracle Linux 5 (x86_64) | kernel-uek-2.6.32-300.3.1.el5uek.src.rpm | 5b21593bdb11cedd291237cc75519aa8 | ELSA-2020-5936 |
ofa-2.6.32-300.3.1.el5uek-1.5.1-4.0.53.src.rpm | e75138da9a6fb1144906896e73b6c4ce | - | |
kernel-uek-2.6.32-300.3.1.el5uek.x86_64.rpm | 947d8f2f8e45b19744048b0f1d0335bd | ELSA-2020-5936 | |
kernel-uek-debug-2.6.32-300.3.1.el5uek.x86_64.rpm | 51de1eb85bd3e548d9f0ffd4e9feebc5 | ELSA-2020-5936 | |
kernel-uek-debug-devel-2.6.32-300.3.1.el5uek.x86_64.rpm | a0aaf92a93f27e370ed9d11c6e39c598 | ELSA-2020-5936 | |
kernel-uek-devel-2.6.32-300.3.1.el5uek.x86_64.rpm | 76714da3cd700d706ba081ab6f7b51c6 | ELSA-2020-5936 | |
kernel-uek-doc-2.6.32-300.3.1.el5uek.noarch.rpm | 2ac6244634679d284dd6235da511dea2 | ELSA-2020-5936 | |
kernel-uek-firmware-2.6.32-300.3.1.el5uek.noarch.rpm | 60a133b718f92aed90b8256be41c97a3 | ELSA-2020-5936 | |
kernel-uek-headers-2.6.32-300.3.1.el5uek.x86_64.rpm | fade515ab4e65c9b05c95784ae720882 | ELSA-2014-3108 | |
ofa-2.6.32-300.3.1.el5uek-1.5.1-4.0.53.x86_64.rpm | 25d599d077db8005dbf152d3f9c6fad5 | - | |
ofa-2.6.32-300.3.1.el5uekdebug-1.5.1-4.0.53.x86_64.rpm | 08faa41a3c47463732d0219c538f76aa | - | |
Oracle Linux 6 (i386) | kernel-uek-2.6.32-300.3.1.el6uek.src.rpm | 896f13889aac09fb78690b254a4239cf | ELSA-2021-9215 |
ofa-2.6.32-300.3.1.el6uek-1.5.1-4.0.47.src.rpm | d5413aa9ba292bd161e85255606094dd | - | |
kernel-uek-2.6.32-300.3.1.el6uek.i686.rpm | 521b26fe9f45ff5ee9feaec9c1ce3105 | ELSA-2021-9215 | |
kernel-uek-debug-2.6.32-300.3.1.el6uek.i686.rpm | 80164b5eb4ccadebcbda81220a37aa85 | ELSA-2021-9215 | |
kernel-uek-debug-devel-2.6.32-300.3.1.el6uek.i686.rpm | 60dc44b320a69a63e8c2c3a80725867a | ELSA-2021-9215 | |
kernel-uek-devel-2.6.32-300.3.1.el6uek.i686.rpm | 3c056adcddd17c4890e16d52073e065d | ELSA-2021-9215 | |
kernel-uek-doc-2.6.32-300.3.1.el6uek.noarch.rpm | 9eaa0435708d530d18f7af2107af608b | ELSA-2021-9215 | |
kernel-uek-firmware-2.6.32-300.3.1.el6uek.noarch.rpm | 22ed087d1b0e0fa3ebe6250e7daf8a4e | ELSA-2021-9215 | |
kernel-uek-headers-2.6.32-300.3.1.el6uek.i686.rpm | f5a23a56d4b2442fea48aa986ea0a823 | ELBA-2014-3101 | |
ofa-2.6.32-300.3.1.el6uek-1.5.1-4.0.47.i686.rpm | a1e632c973a1008c3318d12cf231bf12 | - | |
ofa-2.6.32-300.3.1.el6uekdebug-1.5.1-4.0.47.i686.rpm | 78da113ae717dce23e1eb1e3258fc49f | - | |
Oracle Linux 6 (x86_64) | kernel-uek-2.6.32-300.3.1.el6uek.src.rpm | 896f13889aac09fb78690b254a4239cf | ELSA-2021-9215 |
ofa-2.6.32-300.3.1.el6uek-1.5.1-4.0.47.src.rpm | d5413aa9ba292bd161e85255606094dd | - | |
kernel-uek-2.6.32-300.3.1.el6uek.x86_64.rpm | c4c42e601c8e1a9a953c427366b26314 | ELSA-2021-9215 | |
kernel-uek-debug-2.6.32-300.3.1.el6uek.x86_64.rpm | b7216083f48fabbaa5cfe48b3ee2f197 | ELSA-2021-9215 | |
kernel-uek-debug-devel-2.6.32-300.3.1.el6uek.x86_64.rpm | dd5e01da67393b7433a583246d7d8527 | ELSA-2021-9215 | |
kernel-uek-devel-2.6.32-300.3.1.el6uek.x86_64.rpm | cfc1088777e9a82a7a63c9ba40b88ffd | ELSA-2021-9215 | |
kernel-uek-doc-2.6.32-300.3.1.el6uek.noarch.rpm | 9eaa0435708d530d18f7af2107af608b | ELSA-2021-9215 | |
kernel-uek-firmware-2.6.32-300.3.1.el6uek.noarch.rpm | 22ed087d1b0e0fa3ebe6250e7daf8a4e | ELSA-2021-9215 | |
kernel-uek-headers-2.6.32-300.3.1.el6uek.x86_64.rpm | d7ded61b4190f50c97803026c9f52742 | ELBA-2014-3101 | |
ofa-2.6.32-300.3.1.el6uek-1.5.1-4.0.47.x86_64.rpm | 2f1bd36eb6fd27cf1272548018de8b08 | - | |
ofa-2.6.32-300.3.1.el6uekdebug-1.5.1-4.0.47.x86_64.rpm | 3ac62a031c60d6ee0b3501d5d52a9477 | - |
This page is generated automatically and has not been checked for errors or omissions. For clarification or corrections please contact the Oracle Linux ULN team