Skip to Main Content

CVE

image description here
Unbreakable Linux Network (ULN)

CVE Summary

The following CVE are available for all releases offered through Unbreakable Linux Network (ULN).

CVE IdentifierDescriptionRelease Date
CVE-2026-80757In the Linux kernel, the following vulnerability has been resolved: selinux: reject a class permission count below its inherited common security_get_permissions() maps an inherited common's permissions into an array sized by the class's own permissions.nprim, but class_read() takes that nprim verbatim from the policy image and never checks that it covers the common. A class that inherits a common of N permissions while declaring a smaller nprim is accepted, and on load the common's permissions are written past the class-sized array -- an out-of-bounds heap write. Reject a class whose permission count is below its inherited common's. Well-formed policies, where the class count already includes the inherited permissions, are unaffected.2026-09-03
CVE-2026-80756In the Linux kernel, the following vulnerability has been resolved: selinux: do not cancel a policy conversion that never started sel_write_load() calls selinux_policy_cancel() when sel_make_policy_nodes() fails, and that helper dereferences the outgoing policy to cancel its sidtab conversion. On the first policy load there is no outgoing policy: security_load_policy() returns early for that case, before it converts anything, and state->policy is still NULL. A first load that fails while building the selinuxfs tree therefore takes a NULL dereference in selinux_policy_cancel(), reached from a write(2) to /sys/fs/selinux/load. Skip the cancel when there is no old policy, mirroring the check security_load_policy() already makes before it converts.2026-09-03
CVE-2026-80754In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix F55 transmitter electrode count typo During F55 sensor detection, the transmitter (TX) electrode count was incorrectly assigned the value of the receiver (RX) electrode count due to copy-paste typos. This incorrect value was then propagated to the driver data and used by F54 to determine the diagnostics report size. On devices with more RX than TX electrodes, this inflated the perceived TX count, leading to incorrect report size calculations and potential out-of-bounds buffer accesses. Fix the typos by correctly assigning the TX electrode counts.2026-09-03
CVE-2026-80744In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables_offload: suppress WARN_ON_ONCE for ENOMEM in abort path In nft_flow_rule_offload_abort(), WARN_ON_ONCE(err) is triggered on every error during rollback, including -ENOMEM. Memory allocation failures are expected under low-memory conditions and do not indicate a kernel bug. Trace for example: nft_flow_offload_chain() // FLOW_BLOCK_BIND nft_flow_block_chain() nft_chain_offload_cmd() nft_block_offload_cmd() ->ndo_setup_tc() nsim_setup_tc() flow_block_cb_setup_simple() flow_block_cb_alloc() // fails to -ENOMEM The warning was reproduced on the 5.10 stable kernel under memory pressure via fault injection, but the underlying bug exists in mainline as well, as demonstrated by the ENOMEM trace above. The following splat was triggered during nf_tables transaction processing: WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline] WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591 Modules linked in: CPU: 0 PID: 8567 Comm: syz-executor.0 Not tainted 5.10.260-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline] RIP: 0010:nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591 Call Trace: nf_tables_commit+0x3bd/0x4bd0 net/netfilter/nf_tables_api.c:8604 nfnetlink_rcv_batch+0xb1e/0x1f20 net/netfilter/nfnetlink.c:509 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:579 [inline] nfnetlink_rcv+0x3b3/0x420 net/netfilter/nfnetlink.c:597 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x6cd/0xa00 net/netfilter/af_netlink.c:1340 netlink_sendmsg+0x906/0xe10 net/netfilter/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x155/0x190 net/socket.c:663 ____sys_sendmsg+0x705/0x870 net/socket.c:2379 ___sys_sendmsg+0x100/0x170 net/socket.c:2433 __sys_sendmsg+0xe9/0x1c0 net/socket.c:2462 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Change the condition to WARN_ON_ONCE(err && err != -ENOMEM) so that warnings are only emitted for unexpected errors. This aligns with the common kernel practice of not warning on -ENOMEM. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.2026-09-03
CVE-2026-80742In the Linux kernel, the following vulnerability has been resolved: af_packet: Don't send zero-byte data in tpacket_snd(). syzbot reported a WARNING in __dev_queue_xmit() triggered via tpacket_snd(): skb_assert_len WARNING: at include/linux/skbuff.h:2753 skb_assert_len WARNING: at __dev_queue_xmit+0x21bc/0x4970 net/core/dev.c:4781 Call Trace: <TASK> dev_queue_xmit include/linux/netdevice.h:3448 [inline] packet_xmit+0x243/0x310 net/packet/af_packet.c:276 tpacket_snd net/packet/af_packet.c:2907 [inline] packet_sendmsg+0x28d6/0x4eb0 net/packet/af_packet.c:3134 When sending 0-byte packets via TPACKET ring buffer on devices with no hard header (e.g. dev->hard_header_len == 0), tpacket_fill_skb() populates an skb with skb->len == 0 and returns 0. tpacket_snd() then forwards this empty skb to packet_xmit(), causing __dev_queue_xmit() to hit skb_assert_len(skb). Similar checks exist in packet_snd() via commit dc633700f00f ("net/af_packet: check len when min_header_len equals to 0") and in packet_sendmsg_spkt() via commit 6a341729fb31 ("af_packet: Don't send zero-byte data in packet_sendmsg_spkt()."). Return -EINVAL in tpacket_fill_skb() when skb->len is zero to reject zero-length packets in tpacket_snd().2026-09-03
CVE-2026-80733In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE() from sk_mc_loop() sk_mc_loop() can be called for sockets that are neither AF_INET nor AF_INET6 (e.g. AF_PACKET sockets when sending packets via raw/packet socket over virtual devices such as VRF or ipvlan). In such cases, sk_family is not AF_INET/AF_INET6 and sk_mc_loop() falls through the switch statement and triggers WARN_ON_ONCE(1). Non-INET sockets do not support IP_MULTICAST_LOOP or IPV6_MULTICAST_LOOP options, so loopback should default to true without generating a warning.2026-09-03
CVE-2026-80731In the Linux kernel, the following vulnerability has been resolved: net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header dev_validate_header() reads dev->hard_header_len directly when zero-padding short link layer headers for CAP_SYS_RAWIO holders: if (capable(CAP_SYS_RAWIO)) { memset(ll_header + len, 0, dev->hard_header_len - len); return true; } Packet send paths call dev_validate_header() on skbs whose headroom was allocated from an earlier hard_header_len read. If the device is reconfigured so that dev->hard_header_len increases before validation, the memset writes past the reserved buffer, an out-of-bounds write. This out-of-bounds write is masked in some SOCK_RAW paths today because the same concurrent increase can first make skb_push() exceed the reserved headroom and trigger skb_under_panic(). Remove the zero-padding branch before making those hard_header_len reads consistent, so the snapshot fixes do not turn a loud panic into a silent overwrite. This path is only reached for variable length L2 protocols, where len < hard_header_len but len >= min_header_len. No remaining in-tree variable length L2 protocol implements header_ops->validate, and the CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no real value beyond allowing testing of intentionally malformed input. Drop the CAP_SYS_RAWIO branch. The remaining reads of dev->hard_header_len in dev_validate_header() are comparisons only and have no memory safety impact.2026-09-03
CVE-2026-80722In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate individual TWT params before driver setup ieee80211_process_rx_twt_action() only partially validates a received S1G TWT setup frame before queueing it. An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup() with twt->length too short for the full struct ieee80211_twt_params. The individual path passes twt to drv_add_twt_setup(). Both the tracepoint and the driver callback consume the complete parameters block, not merely req_type. Do not pass a short individual agreement to the driver. Broadcast agreements remain unchanged because they are rejected locally after accessing only req_type. [edit commit message to not overclaim lack of validation nor understate driver impact]2026-08-28
CVE-2026-80717In the Linux kernel, the following vulnerability has been resolved: sctp: validate Adaptation Indication parameter length The Adaptation Layer Indication parameter contains a fixed 32-bit Adaptation Code Point after its parameter header. However, sctp_verify_param() accepts a header-only parameter because the generic parameter walker only requires the header to be present. sctp_process_param() then reads adaptation_ind beyond the declared parameter. When the malformed parameter is last in an INIT, the read starts at the receive skb tail, and the value is copied into the state cookie returned in the INIT ACK. This may disclose four receive-buffer tail bytes. Require the declared parameter length to match the fixed structure size and abort the association through the existing invalid parameter length path otherwise.2026-08-28
CVE-2026-80716In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: wake linked drain waiters on unlink snd_pcm_drain() on a linked stream parks an on-stack wait entry on the drained peer's runtime->sleep, and after schedule_timeout() removes it only if that peer is still found in the caller's group. If group membership changes during the wait and the sleep ends by signal or timeout (so autoremove_wake_function() does not run), finish_wait() is skipped and snd_pcm_drain() returns with the entry still queued on that stream's sleep list; a later wake_up() then walks a freed stack frame. This is reachable by unlinking either the drained or the draining stream. Unlike the close path (snd_pcm_drop() -> snd_pcm_post_stop()), snd_pcm_unlink() never wakes the sleep queues. Wake every group member under the group lock before the membership change, so a linked drainer is released and drops its entry while the streams are still grouped. The window was opened when snd_pcm_link_rwsem stopped being held across the wait and the removal became conditional on group membership (see Fixes). The later switch to finish_wait() kept that conditional removal, so the signal/timeout case remained.2026-08-28
CVE-2026-80715In the Linux kernel, the following vulnerability has been resolved: igc: remove napi_synchronize() in igc_down() When an AF_XDP zero-copy application is killed abruptly, the XSK pool is torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the full budget on every poll, so napi_complete_done() never clears NAPI_STATE_SCHED. igc_down() calls napi_synchronize() before napi_disable(), so it spins forever waiting for that bit and the interface never goes down. Drop the napi_synchronize() and let napi_disable() do the job -- it sets NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after polling has stopped, matching the recent igb fix b1e067240379.2026-08-28
CVE-2026-80714In the Linux kernel, the following vulnerability has been resolved: ipvs: do not propagate one-packet flag to synced conns Synced connections can be created before their destination exists. When the destination is later added, ip_vs_bind_dest() copies connection flags from the destination into cp->flags. IP_VS_CONN_F_ONE_PACKET connections are not synced. If a synced connection inherits IP_VS_CONN_F_ONE_PACKET while it is already hashed, expiry can treat it as a one-packet connection and skip unlinking the existing conn_tab node, leaving stale hash nodes pointing at a freed struct ip_vs_conn. Drop IP_VS_CONN_F_ONE_PACKET from destination flags when binding synced connections.2026-08-28
CVE-2026-80707In the Linux kernel, the following vulnerability has been resolved: can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer Zero the allocated buffer in j1939_session_fresh_new() to ensure it contains no residual data. While there is a potential performance impact if users allocate maximum sized ETP buffers, most real-world use cases are not noticeably affected since the maximum known buffer size is typically around 65K. [mkl: add Message-ID]2026-08-28
CVE-2026-80706In the Linux kernel, the following vulnerability has been resolved: can: softing: fw_parse(): validate firmware record spans fw_parse() reads a fixed record header, a firmware-provided payload, and a trailing checksum without knowing the end of the firmware blob. A truncated record can therefore make those reads exceed the blob. The same record also supplies addresses and lengths for writes into DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its bounds check, while the application loader does not bound the staging copy at all. Pass the firmware end to the parser and validate the full source record. Use a signed wide offset for generic DPRAM records and validate the application staging span against the mapped DPRAM before copying.2026-08-28
CVE-2026-80681In the Linux kernel, the following vulnerability has been resolved: vxlan: re-fetch eth header after route_shortcircuit() Before route_shortcircuit(), the eth header pointer is cached from eth_hdr(skb). Inside route_shortcircuit(), pskb_may_pull() can be called, which may reallocate skb->head. In this case, returning to vxlan_xmit() leaves the cached eth pointer pointing to freed memory, leading to a use-after-free when dereferencing eth->h_dest. Fix this by updating eth = eth_hdr(skb) after calling route_shortcircuit().2026-08-28