Printer View

Browse Published Validated Configurations  >  Validated Configuration Details  >  Virtual Machine Configurations
Linux Distribution Details
OSOEL 4 Update 6 x86_64
Kernelkernel-smp-2.6.9-67.0.22.0.2.EL.x86_64.rpm, kmod-xenpv-smp-0.1-10.0.2.el4.x86_64.rpm or higher
Virtualization TypeHardware Virtualized
 
Filesystems Tested
File SystemMount OptionsDetails
ext3NoneFor single instance database files.
Configuration Files
Comments
/etc/modprobe.confalias eth0 xen_vnif -
 alias scsi_hostadapter xen_vbd -
/etc/security/limits.conforacle soft core unlimited -
 oracle soft nproc 131072 -
 oracle hard nproc 131072 -
 oracle soft nofile 131072# depending on size of db, these may need to be larger
 oracle hard nofile 131072 -
 oracle hard core unlimited -
/etc/selinux/configSELINUX=disabledRefer Bug Nos.: 6079461, 6081490
/etc/sysctl.confnet.core.wmem_default=262144 -
 net.core.wmem_max=262144 -
 fs.aio-max-nr=3145728 -
 net.ipv4.ip_local_port_range=1024 65000 -
 kernel.shmmax=2076477440#Set to a value half the size of physical memory
 net.core.rmem_max=4194304# rmem_max can be tuned based on workload to balance performance vs lowmem usage
 net.core.rmem_default=262144# rmem_default can be tuned based on workload to balance performance vs lowmem usage
 kernel.sysrq=1 -
 kernel.shmall=3279547 -
 kernel.shmmni=4096 -
 kernel.sem=250 32000 100 142 -
 kernel.msgmax=8192 -
 kernel.msgmni=2878 -
 fs.file-max=327679 -
 kernel.msgmnb = 65536 -
Miscellaneous
-
Oracle Software
OracleOracle Database 10g Release 2, Single Instance and Oracle Real Application Clusters (RAC) for Linux x86_64
Version10.2.0.3
Patch5452672
 
Configuration Feedback
Bug No4593892
Summaryrepeated warnings in dmesg about lost ticks (it 80129/bz 139376)
Affectsusually seen on x86-64, both Intel and Opteron based systems
Symptomsdmesg will have errors like: warning: many lost ticks. Your time source seems to be instable or some driver is hogging interrupts rip __do_softirq+0x4d/0xd0
SolutionFixed in U5
 
Bug No5041764
SummaryCFQ io scheduler can delay/hang io (bz 184535/it 88208 )
Affectsheavy io access to raw/block devices
Symptomsio requests will start to hang or take a long to complete RAC node could be evicted
SolutionFixed in U4. Pre-U4, boot w/ elevator=deadline
 
Bug No5058952
Summarye1000 flow control defaults to none in the 2.6 kernel
Affectse1000 network interfaces with heavy traffic
SymptomsNetwork performance of the system is affected. For e.g: In the case of a RAC cluster, this may result in lost global cache blocks.
SolutionFixed in U4. Pre-U4, load e1000 with FlowControl=1 (Rx)
 
Bug No5093059
Summarynetdump doesn't load with bonding configured (it 85145)
Affectsbringing up netdump over a bonded interface
Symptoms/var/log/messages will have an error: netlog: bond0 doesn't support polling, aborting.
SolutionFixed in U4.
 
Bug No5136660
Summarybonding primary=ethX doesn't take effect
AffectsBonding doesn't take effect
SymptomsIf we make a bond of eth5 and eth6, where eth6 is primary, on reboot eth5 will become active which makes server inaccessible.
SolutionFixed in 2.6.9.42.0.3.0.2.EL kernel or higher
 
Bug No5333606
Summaryrpm throws errors if selinux is disabled at OS installation and is enabled at runtime
Affectserror at rpm packages installs
Symptomsduring packages installation, errors indicate the scriplet failures
Solutionrelabel the filesystems through 'touch /.autorelabel' or 'fixfilesrelabel'
 
Bug No5447805 (BZ 202186)
SummaryKernel panic on 'aio_put_req' with x86_64 RHEL 4 AS U3 when all multipathed paths fails at the same time
Affectsmultipath solutions
SymptomsKernel panic on aio_out_req
SolutionFixed in kernel-2.6.9-42.5.EL.src.rpm (available from RedHat) or in kernel-smp-2.6.9.42.0.3.0.3.EL.x86_64.rpm (available from Oracle)
 
Bug No5463714
Summarysystem will hang if reboot or restart iscsi service without unmount ocfs2 partition on iscsi volume
Affectssystem hang
Symptomsrestart iscsi service or reboot without umount iscsi volume cause system hang
Solutionunmount iscsi volume before restart iscsi service or reboot server
 
Bug No5593995
SummaryUsing Pro*C causes the system to run out of memory
AffectsCaused the system to hang.
SymptomsThe system hangs.
SolutionFor OEL5U3, Remove references to pathnames that do not exist on your system in pcscfg.cfg. Fixed in OEL5U4.
 
Bug No5693201
SummaryApplication does not detect OEL4 as RHEL4
AffectsApplications that use /etc/redhat-release for detection of distribution
SymptomsApplications that use /etc/redhat-release for detection of distribution may error out
Solutionecho "Red Hat Enterprise Linux AS release 4 (Nahant Update 4)" > /etc/redhat-release
 
Bug No7240271
SummaryKernel panic occurs while starting up Oracle Enterprise Manager agent
Affects2.6.9-67.0.20.0.1.EL ( OEL ) or 2.6.9-67.0.20.EL ( RHEL ) kernels
SymptomsMachine will experience a linux BUG, panic & reboot, when the EM Agent starts.
SolutionEL4.6 errata ( 2.6.9-67.0.20.0.2 and 2.6.9-67.0.22.0.1) kernel patches that have this fix.
 
Bug NoRedhat Bugzilla 202027
SummaryClear_kernel_mapping: mapping has been split. will leak memory
AffectsSeen on x86-64 Opteron based systems
Symptoms/var/log/messages will have errors like clear_kernel_mapping: mapping has been split. will leak memory
SolutionFixed in U5
 
Bug No5240928
Summarywarning messages in trace files during certain workloads with async io turned on
AffectsPerformance under high i/o load
SymptomsFollowing warning in trace files WARNING: ORACLE PROCESS RUNNING OUT OF OS KERNEL I/O RESOURCES
SolutionFixed in 10.2.0.4. For 10g, versions lower than 10.2.0.4 ,apply patch 5452672.
 
 
Copyright (c) 2007, Oracle Corporation. All Rights Reserved.